Consumables

The handling of small liquid volumes desires a high precision manufacturing of the entire instrument, including dispensing tips and cartridges. We provide exceptional dispensing capillaries to meet the requirements of precision and accuracy.

PipeJet® pipes

The PipeJet® pipes are compatible to a wide range of liquids and provide a precise nanoliter droplet ejection

The standard PipeJet® pipes are made from polyimide, a chemically inert and extremly durable polymer. Depending on the inner diameter (see table below) the dead volume varies from 0.4 µl to 6.4 µl. The pipes can be connected to our disposable reservoirs which hold up to 1 ml of your sample. Depending on your application, the pipes are available in different inner diameter and length. Coatings to prevent wetting effects are also available.

Pipe - dispensing tip for the PipeJet® Nanodispenser
Type Volume range Dead volume Free pipe length Aspiration Material Coating
125-S-C 1 - 8 nl* 0.4 µl 3 mm - FEP & PI yes
200-S 8 - 20 nl* 0.7 µl 3 mm - FEP & PI -
200-S-C 8 - 20 nl* 0.7 µl 3 mm - FEP & PI yes
200-L 8 - 20 nl* 0.7 µl 8 mm yes FEP & PI -
200-L-C 8 - 20 nl* 0.7 µl 8 mm yes FEP & PI yes
500-S 20 - 70 nl* 4.5 µl 3 mm - PP & PI -
500-S-C 20 - 70 nl* 4.5 µl 3 mm - PP & PI yes
500-L 20 - 70 nl* 5.5 µl 8 mm yes PP & PI -
500-L-C 20 - 70 nl* 5.5 µl 8 mm yes PP & PI yes
500-XL 20 - 70 nl* 6.4 µl 13 mm yes PP & PI -
500-XL-C 20 - 70 nl* 6.4 µl 13 mm yes PP & PI yes
* depending on liquid type
PipeJet® pipes brochure

Our brochure is currently not available. Please contact us directly or request further information via E-Mail.

SiJet cartridges

The SiJet dispensing cartridges provide a non-contact picoliter dispensing at lowest dead volume of less than 1 µl

The cartridge holds up to 80 µl of your sample in an integrated reservoir. Install the cartridge to the SiJet PicoDispenser and dispense picoliter droplets via our drop on demand dispensing technology. Dispense cell suspensions for your cell culture application or load the cartridge with conductive polymers for an efficient coating of your substrate.

Dispensing cartridge for the SiJet Picodispenser
Type Volume range Dead volume Reservoir size
20 50 - 60 pl* <1 µl 80 µl
40 150 - 250 pl* <1 µl 80 µl
* depending on liquid type
SiJet® cartridge brochure

Our brochure is currently not available. Please contact us directly or request further information via E-Mail.